The Internal Lighting Kit is an optional multi-colored LED display made to mount inside your amplifier. It illuminates the tubes and other innards for a very cool visual effect.
It connects to the same wiring as the lit logo panel, and thus changes colors in the same way. You can purchase this kit as a DIY add-on to your existing amplifier, or you can have us install it for a nominal up-charge. If purchasing this for a new amp, select the “Installed” option.
As a DIY project this kit requires the following tools — #1 and #2 Phillips screwdrivers, and wire cutters to trim the cable ties. Preferred tools, though not necessary, are a powered screwdriver, and a drill with a 1/16″ bit for pilot holes to mount the LED board.
- (1) RGB Lighting Board
- (1) Backing / Spacer Plate
- (1) 4 conductor wire harness
- (5) #4 pan head screws to mount lighting board
- (2) 3/16″ cable clamps
- (2) #6 pan head screws for cable clamps
- (5) 4″ wire ties